Main Menu

Portable Vibration Calibrator Sensor Mounting Kit

Adaptors, Studs, Mounting Bases | Model 9100-MNTKIT

tms 9100 mntkit product 1Mounting accessory kit for 9100 Series Portable Vibration Calibrators to adapt to 1/4-28 threaded mounting platform. Includes studs/inserts (1/4-28, 10-32, 6-32 and 5-40) and bases (for adhesive, magnetic and custom thread patterns).

 

 

Mounting Studs and Thread Adaptors

 

081B20 (qty 3)

Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu with shoulder

Full specs from manufacturer

081A08 (qty 3)

Mounting stud, 10-32 to 1/4-28 x 0.30" long, BeCu

Full specs from manufacturer

081A27  (qty 3)

Mounting stud, 5-40 to 5-40 threads, without shoulder, BeCu

Full specs from manufacturer

9155-MNT32 (qty 3)

Thread adaptor, 10-32 internal thread x 1/4-28 external thread, BeCu

9155-MNT38 (qty 3)

Thread adaptor, 6-32 internal thread x 1/4-28 external thread, stainless steel

Mounting Bases

 

9155-MNT05

Calibration mounting adaptor

0.625” hex flat base for sensors with 5-40 integral stud, stainless steel. For 1/4-28 threaded shakers

9155-MNT07

Calibration mounting adaptor

1" hex flat base for adhesive mounting sensors, stainless steel. For 1/4-28 threaded shakers

PVC-HTMNT01

Calibration mounting adaptor

Circular plate for 3 and 4-hole bolt pattern high-temp vibration sensors with:

  • Triangular hole patterns on a 1.00" (25.4mm) diameter circle, uses a 4‑40 mounting thread.
  • Triangular hole patterns on a 1.20" (30.5mm) diameter circle, uses an 8‑32 mounting thread.
  • Square hole patterns on a 1.375" (35mm) diameter circle, uses a 6‑32 mounting thread.
  • Square bolt pattern with holes 1.19” (30.2mm) apart on all sides, uses a 1/4‑28 mounting thread.

PVC-HTMNT02

Calibration mounting adaptor

Circular plate for 3 and 4‑hole bolt pattern high-temp vibration sensors with:

  • Triangular hole pattern on a 1.19" (30.2mm) diameter circle, uses an M4x0.7 mounting thread.
  • Square bolt pattern with holes 1.18” (30mm) apart on all sides, uses an M6x1.0 mounting thread.
tms 9100 mntkit product 17

S4A-3

Universal Transducer Adaptor Circular Plate

Circular plate for custom mounting holes to be drilled and tapped. Includes 1.75” diameter x 0.25” deep generic mounting pad (stainless steel), 1/4-28 flat head cap screw, and a 5/32" hex wrench

Adhesive

 

tms 9100 mntkit product 2

080A90

Loctite 454 - Quick bond Gel (for use with accelerometer adhesive mounting bases to fill gaps on rough surfaces)

Full specs from manufacturer